Degree of protection (IP) IP67
Shipping weight, approx 10.4 kg
Shock Opsal: 15 G
Wire strip length Power and ground terminals: 0.35 in (9 mm)
Vibration Opsal, 1 G, 0.15 mm (0.006 in) displacement
Tightening torque Power and ground terminals: 4.5 in-lb per UL/NEMA (sary terminal)
Mechanical life operations Output ratings (sourced from control circuit): 50000000 ops (18K ops/hr)
Disconnect lock out Recommend 8 mm (5/16 in) lock shackle or hasp. The hasp should not exceed 8 mm (5/16 in) when closed.

Overload current 3.2 A
Communication DeviceNet
Short circuit protection 10 A rated device
DeviceNet input current surge 15 A for 250 µs
DeviceNet input current 364mA @ 11V DC - 4.0 W
Total w/max. sensor inputs (4) 367mA @ 24V DC - 8.8 W
Overvoltage category Control circuit: III per IEC
Rated operational current Power circuit: 5.5 A maximum
Rated impulse voltage Power circuit: 6 kV
DeviceNet supply voltage rating Range 11...25V DC @ 24V DC nominal
Baud rates 125, 250, 500 kbps
Control current (pick up) Power requirements: 0.71 A without HOA
Control current (hold in) Power requirements: 0.63 A without HOA
Rated input operation voltage Sourced from control circuit: 24V DC
Input OFF-state current <1.5 mA
Input OFF-state voltage 0...5V DC
Input ON-state voltage 10...26V DC
Distance, max 500 m (1630 ft) @ 125 kbps
Operating frequency Power circuit: 50/60 Hz
Input ON-state current 7.2mA @ 24V DC
Number of contacts Output rating- sourced from control circuit: 2
Voltage status only Sensor source: 11...25V DC from DeviceNet
Output current, max External devices powered by control voltage: 2 A without HOA
Trip rating 120% of full load current (FLC) setting
Input compatibility IEC 1133 Type 1+ per IEC
Application in industrial area permitted (SCPD list) Size per NFPA 70 (NEC) or NFPA 79 for group motor applications
Rated output operation voltage Sourced from control circuit: 240V AC / 30V DC
Insulation voltage Power circuit: rated 600V
Dielectric withstand Power circuit: 2500V AC per IEC
Type of contacts Output rating- sourced from control circuit: normally open (NO)
Current available Sensor source: 50 mA maximum per input, 200 mA total
Type of control circuit Output rating- sourced from control circuit: electromechanical relay
Conventional thermal current (Ith) Output rating- sourced from control circuit: total of both outputs ≤2 A
Circuit breaker operational current rating, max 60A @ 480V (with gland type: CR or DR)
RMS symmetrical amperes 65 kA @ 480Y/277V (with gland type: RR)
Rated operation voltage Power circuit: 200...575V
3-phase power/motor cable connection Conduit entrance
Input filter - software selectable Settable from 0...64 ms in 1 ms increments (ON to OFF)
Kind of current Output ratings (sourced from control circuit): AC/DC (not to be used as an AC/DC power supply)
Fuse operational current rating, max Time delay: 20 A @ 480Y/277V (with gland type: RR)
Total control power (pick up) Power requirements: 84VA with HOA
Total control power (hold in) Power requirements: 9VA without HOA
Trip class Class 10, 15, 20
Operational power rating Full voltage starters - IP67/Type 4/12: 3Hp @ 460V AC, 60 Hz (Current rating 1.1...5.55 A)
Number of digital inputs 4
Number of digital outputs 2
Supporting protocol for DeviceNet True
Application in industrial area permitted True
Max. output frequency 400 Hz
Mains frequency 50/60 Hz
Short circuit protection device performance (SCPD) type Type 1
Utilization category Power circuit: AC-3 per IEC
External devices powered by DeviceNet 50 mA - total 200 mA
Electrical life cycle Output ratings (sourced from control circuit): 100000 ops (1.8K ops/hr)